Shape the tone of any recording with the Channel EQ from the TuttiDAW studio - low and high shelves, a sweepable mid bell, and output gain. Processing never leaves your device.
100% in your browser - your files never leave your device.
That's the actual device from the TuttiDAW studio. Dial it in, then drop a file above - it opens right in the (free, no-signup) studio with this device on the track: listen live, keep tweaking, and export from there.
Any MP3, WAV, OGG, FLAC or M4A. It decodes locally in the page - no upload, no account, no length limits.
Low shelf and high shelf (±15 dB), a mid bell you can sweep from 120 Hz to 7.5 kHz, and output gain to compensate. The exact Channel EQ effect from the TuttiDAW editor does the processing.
Dropping the file opens it straight in the free TuttiDAW studio with your EQ already on the track - listen in realtime while you adjust, then export a WAV in one click. No sign-up needed.
Most everyday EQ jobs need three moves, not thirty bands: cut some low-end rumble from a voice memo, tame a boxy mid on a phone recording, or add a little top-end air to a dull mix. This tool is exactly that - the workhorse channel EQ from a real DAW, reduced to the five controls those jobs use.
Typical recipes: for muddy speech, pull Low down a few dB and sweep the Mid around 250-400 Hz with a small cut; for harsh recordings, find the offending band by boosting the Mid, sweeping until it hurts, then cutting there instead; for a dull master, +2 dB on the High shelf goes a long way. Use Output gain to match loudness so you judge tone, not volume.
Because processing happens in your browser with the same effect engine the studio uses, what you hear in the preview is exactly what lands in the WAV - and your audio never touches a server.
It is the Channel EQ effect from the TuttiDAW studio: low shelf, sweepable mid bell (120 Hz - 7.5 kHz) and high shelf, ±15 dB each, plus output gain. For surgical multi-band work, open the free studio and use EQ Eight on the same file.
No. Decoding, EQ processing and WAV encoding all run inside the page on your device.
Uncompressed 16-bit stereo WAV at 44.1 kHz, rendered offline through the effect - not a re-recording of playback, so it is bit-deterministic and faster than realtime.
Run the EQ here, download, then drop the result into the compressor tool - or click "Open in TuttiDAW studio" and add any of the 37 studio effects to the same track.
Need more than three bands? The full studio has EQ Eight with spectrum analysis - free, in the same browser.
Explore TuttiDAW - the free browser DAW